Motion Control, Laser, and Motor Drivers
Files Available For Download
Testra Corporation  1201 N. Stadem Drive Tempe, AZ 85281 Ph:(480)895-8439 Fax:(480)895-3589
GO TO HOME PAGE
Revised 4/04/06

Application Notes
AN-101 Getting Started - Setup instructions for a  new user
AN-102 Homing Systems - Discussion of alternate methods of Homing
AN-103 Training - Using Handwheels for Jogging for training applications.
AN-104 Linear Table Demo - Setup Instructions
AN-105 Setting up an Axis on the ss4544
AN-106 Installing Laser Engraver or other Firmware in ss4544
AN-107 Saving the Motion Parameters
AN-108 Motor Waveform Compensation
AN-109 ssCNC Setup
AN-110 ssLASER.ini Setup
AN-111 Dual Axis Drive Setup
AN-112 Using the Optional Step and Direction Controls

Data Sheets (pdf format)
ss483        SoftStep Microstepping Driver
ss4544      4-axes Motion Control Systems
ssLASER  Laser beam control package

AUTOIFC Automation Interface

Software
ssDEMO        Latest Motion Parameter Setup Program for ss4544 +HPGL,+CNC demos +LExxx For Windows95/98/ME or DOS

ssXP Latest Motion Parameter Setup Program for ss4544 +LExxx for Windows XP/2000

TestraMW CAD/CAM 10/03/3 Self extractingzip file
ssCNC            Stand Alone CNC control that runs from Windows 95/98/ME or DOS
ssLASER.drv Windows 95/98/ME Print Driver for ssLASER application. Update Only!
LE511.hex      ssLASER,ssROUTER applicatiion for ss4544 Use ssDEMO v1.90 or later to update MPM
Note: LE511 old production version for ssROUTER and ssLASER.
LE631.hex      ssLASER,ssROUTER,ssPLASMA applicatiion for ss4544 Use ssDEMO v2.09 or later to update MPM
Note: LE631 current production version for ssPLASMA,ssLASER, and ssROUTER. Please report any problems found.

GO TO HOME PAGE
If you have comments or suggestions, email us at support@testra.com
Testra Corporation   1201 N. Stadem Drive  Tempe, AZ 85281  Ph. 480-895-8439  Fax: 480-895-3589